ASTM A53/API5l/A106/A333/A36/St35/St52/X42/X52/X56/X60/65 X70 Sch40 LSAW ERW SSAW Hot Rolled Seamless/Welded Hollow Carbon Steel Pipe for Oil and Gas Pipeline

We are a factory specializing in the production of ASTM A53/API5l/A106/A333/A36/St35/St52/X42/X52/X56/X60/X65/X70 Sch40 LSAW ERW SSAW Hot Rolled Seamless/Welded Hollow Carbon Steel Pipe for Oil and Gas Pipeline.
Request a Quote

PRODUCTS DETAILS

  • Overview
  • Product Description
  • Product Test
  • About Us
  • Packaging and Transportation
  • FAQ
Overview

Basic Info.

Model NO.
API 5L ASTM A53 ASTM A106
Usage
Pipeline Transport, Boiler Pipe, Hydraulic/Automobile Pipe, Oil/Gas Drilling, Food/Beverage/Dairy Products, Machinery Industry, Chemical Industry, Mining, Construction & Decoration, Special Purpose
Section Shape
Round
Thickness
1-120 mm
Length
5.8m, 6.4m, 6m, 11.8m, 12m, or as Required
Application
Fluid Pipe, Boiler Pipe
out Diameter
13.7mm-914mm
Standard
ASME JIS DIN GB, BS Standard
Sample
Free Sample
Delivery Time
7-10days
Tolerance
+/-1%
Wall Thickness
Sch5s~Sch80s
Processing Service
Bending Welding Decoiling Punching Cuttingmoulding
MOQ
1 Ton
End Protector
Plastic Pipe Cap
Price Term
CIF CFR Fob EXW
Welding Line Type
ERW, Efw, Seamless, Spiral Welded
Inspection
Accept Thirdparty Inspection
Transport Package
Standard Sea-Worthy Packing
Specification
2tons/bundle
Trademark
Hongyan
Origin
China
HS Code
730411900
Production Capacity
10000 Tons Per Month

Product Description

ASTM A53/API5l/A106/A333/A36/St35/St52/X42/X52/X56/X60/65 X70 Sch40 LSAW ERW SSAW Hot Rolled Seamless/Welded Hollow Carbon Steel Pipe for Oil and Gas Pipeline

Product Description

Carbon Seamless Steel Pipe / tubes

Seamless steel pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow - liquids and gases (fluids), slurries, powders and masses of small solids.
Hot rolled seamless steel pipe deformation process can be summarized as three stages: extension, perforation and finishing. Hot rolled seamless steel pipes is relative to the cold-rolled, cold rolling is below the recrystallization temperature of the rolling and hot rolled is carried out at above the recrystallization temperature of the rolling. Hot rolled seamless steel pipe can damage the refinement of the crystal grains of the steel, cast microstructure of the steel ingot and eliminate the defects of the microstructure so that the the steel organization compacting, improves the mechanical properties. This improvement is reflected in the rolling direction so that the steel is no longer at a certain extent isotropic; pouring the formation of bubbles, cracks and osteoporosis, under high pressure and temperature can also be welded together.
Hot Rolled Steel Pipes (Seamless Tube) in different size, specifications, grades & thickness as per the client's requirements. The range offered by tubes is available as per the international & national standard and can be available from us at affordable prices. These pipes are used in various application industry like shipbuilding, power plants, oil and gas, automotive, sugar mills and distilleries, cement and construction industries etc.

 
Out Diameter 13.7mm-914mm
Wall Thickness 2mm-120mm
Length 2m-12m
Producing Standard American ASME B36.10M, ASTM API 5L, API 5CT
Japanese JIS,German DIN,Chinese GB,BS standard
Steel Grade ASTM A53, A106, A210, A252, A333 etc;
P S L1: A, B, x42, x46, x52, x56, x60, x65, x70
P S L2: B, x42, x46, x52, x56, x60, x65, x70, x80
JIS STPG42, G3454, G3456 etc;
DIN St37, St42, St45, St52, DIN1626, DIN17175;
GB 20#, Q345, 16Mn etc.
Special specifications Available according to customer's requirements and quantity.
End Shape Beveled end, plain end, varnished, or adding plastic caps to protect the two ends as per customer's requirements
Surface treatment Painted, Oiled, galvanized, phosphate etc
Usage 1.Widely used in the mechanical treatment field, petrochemical industry, transport and construction field
2.Ordinary structural purposes and mechanic structural purposes, for example in construction field, fulcrum bearing etc;
3.The transportation of fluids in the projects and big equipments, for example transport of water, oil, gas etc
4.Can be used in low and medium pressure boiler for the transportation of fluids, for example steam tube, big smoke tube, small smoke tube, generating tube etc
Third party inspection Welcome you to send a third party inspecting company (BV, SGS etc) to check the quality of our final products.

ASTM A106 seamless carbon steel tube
ASTM A106/ASME SA106 is the standard specification for seamless carbon steel pipe applied for high temperature services. It includes three grades A, B and C, and common use grade is A106 Grade B. It used in different industries not only for pipeline systems like oil and gas, water, mineral slurry transmission, but also for boiler, construction, structural purposes.
ASTM A106 Grade B pipe is equivalent to ASTM A53 Grade B and API 5L B on chemical position and mechanical properties, in general use carbon steel and yiled strength minimum 240 MPa, tensile strength 415 Mpa.
Description
1. Standards: ASTM A106 (ASME SA106)
2. Products mainly used: apply to bending, curling and similar forming process.
3. The main products of steel / steel grade: Gr.A, Gr.B, Gr.C.
4. Specifications: diameter: 10.3 to 114.3 mm thickness: 0.8 to 12 mm Length: 6 m above, and, in accordance with customer demand, supply and other specifications of steel pipe.
5. Chemical composition and mechanical properties
6. JIS Number and Corrensponding Foreign Standards
Chemical compositions and mechanical properties
Grade Chemical Compositions
C Mn P S Si Cr Cu Mo Ni V
A106-A ≤0.25 0.27-0.93 ≤0.035 ≤0.035 ≥0.10 ≤0.40 ≤0.40 ≤0.15 ≤0.40 ≤0.08
A106-B ≤0.30 0.29-1.06 ≤0.035 ≤0.035 ≥0.10 ≤0.40 ≤0.40 ≤0.15 ≤0.40 ≤0.08
A106-C ≤0.35 0.29-1.06 ≤0.035 ≤0.035 ≥0.10 ≤0.40 ≤0.40 ≤0.15 ≤0.40 ≤0.08
Grade Mechanical Properties
Tensile Strength(Mpa) Yield Strength(Mpa) Elongation(%)
A106-A ≥330 ≥205 30
A106-B ≥415 ≥240 30
A106-C ≥485 ≥275 30


ASTM A53 Carbon Steel Pipe & Tube
ASTM A53 (ASME SA53) carbon steel pipe is a specification that covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8″ to NPS 26.  A 53 is intended for pressure and mechanical applications and is also acceptable for ordinary uses in steam, water, gas, and air lines.
ASTM A53 seamless steel pipe chemical composition:
Grade Chemical Composition (%) Max.
C Mn P S Cu Ni Cr Mo V
A 0.25 0.95 0.05 0.045 0.40 0.40 0.40 0.15 0.08
B 0.30 1.20 0.05 0.045 0.40 0.40 0.40 0.15 0.08
ASTM A53 seamless steel pipe mechanical properties:
Grade Mechanical Properties
Tensile Strength (Mpa) Yield Strength (Mpa)
A ≥48,000 (≥330) ≥30,000 (≥205)
B ≥60,000 (≥415) ≥35,000 (≥240)


API 5L line pipe (Seamless and welded pipe) of all grades have PSL1 and PSL2 two product specifications, they are different on chemical composition, manufacturing processes, mechanical strength, heat treatment, test records, traceability etc.
PSL is the short name of product standard level. The product standard level of line pipe have PSL1 and PSL2, also we could say the quality standard divided in PSL1 and PSL2. PSL2 is higher than PSL1, not only the inspection standard is different, also the chemical property, mechanical strength standards are different. So when place the order for the API 5L line pipe, there should be stated clearly for the size, grades these general specification, also have to clarify the production standard leve, PSL1 or PSL2.

PSL2 is more strictly than PSL1 on the chemical properties, tensile strength, non-destructive test, and impact test.
API 5L PSL1 steel line pipe not required to do the impact test.
For API 5L PSL2 steel line pipe, except Grade X80, all the other grades of API 5L line pipe required the impact test at temperature of 0ºC. The average value of Akv: longitudinal direction≥41J, tranverse direction≥27J.
For API 5L Grade X80 PSL2 line pipe, at 0ºC for all the size, impact test the Akv average value: longitudinal direction≥101J, tranverse direction≥68J.
For API 5L PSL2 line pipe shall perform the hydraulic test for each single pipe, and in the API standard specification not permit to have Non-destructive test replace the hydraulic test, this also is a big difference between Chinese standard and API 5L standard. For PSL1 not required Non-destructive test, for PSL2 shall do the Non-destructive test for each single pipe.
Chemical composition and mechanical strength is also different between API 5L PSL1 line pipe and API 5L PSL2 line pipe. For the detailed specification as below. API 5L PSL2 have restrictions with the carbon equivalent content, where for the carbon mass fraction greater than 0.12%, and equal or less than 0.12%. Different CEQ shall be applied. For line pipe in PSL2 tensile strength have maximum limits.

API 5L PSL 1 / PSL 2 Chemical Composition:
Standard Product
specification
category
Steel
Grade
Chemical Composite
C Mn P S Si V Nb Ti CEpcm
API 5L P S L 1 L210 or A ≤0.22 ≤0.90 ≤0.030 ≤0.030         ≤0.25
L245 or B ≤0.28 ≤1.20 ≤0.030 ≤0.030         ≤0.25
L290 or X42 ≤0.28 ≤1.30 ≤0.030 ≤0.030         ≤0.25
L320 or X46 ≤0.28 ≤1.40 ≤0.030 ≤0.030         ≤0.25
L360 or X52 ≤0.28 ≤1.40 ≤0.030 ≤0.030         ≤0.25
L390 or X56 ≤0.28 ≤1.40 ≤0.030 ≤0.030         ≤0.25
L415 or X60 ≤0.28 ≤1.40 ≤0.030 ≤0.030         ≤0.25
P S L 2 L245R or BR ≤0.24 ≤1.20 ≤0.025 ≤0.015 ≤0.40 C C ≤0.04 ≤0.25
L290R or X42R ≤0.24 ≤1.20 ≤0.025 ≤0.015 ≤0.40 ≤0.06 ≤0.05 ≤0.04 ≤0.25
L245N or BN ≤0.24 ≤1.20 ≤0.025 ≤0.015 ≤0.40 C C ≤0.04 ≤0.25
L290N or X42N ≤0.24 ≤1.20 ≤0.025 ≤0.015 ≤0.40 ≤0.06 ≤0.05 ≤0.04 ≤0.25
L320N or X46N ≤0.24 ≤1.40 ≤0.025 ≤0.015 ≤0.40 ≤0.07 ≤0.05 ≤0.04 ≤0.25
L360N or X52N ≤0.24 ≤1.40 ≤0.025 ≤0.015 ≤0.45 ≤0.10 ≤0.05 ≤0.04 ≤0.25
L390N or X56N ≤0.24 ≤1.40 ≤0.025 ≤0.015 ≤0.45 ≤0.10 ≤0.05 ≤0.04 ≤0.25
L415N or X60N ≤0.24 ≤1,40 ≤0.025 ≤0.015 ≤0.45 ≤0.10 ≤0.05 ≤0.04 Negotiate
API 5L PSL 1 / PSL 2 Mechanical Properties:
Standard Product specification category Steel Grade Yield Strength Tensile Strength
API 5L P S L 1 L210 or A 210 335
L245 or B 245 415
L290 or x42 290 415
L320 or X46 320 435
L360 or X52 360 460
L390 or X56 390 490
L415 or X60 415 520
P S L 2 L245R or BR 245~450 415~760
L290R or X42R 290~495 415~760
L245N or BN 245~450 415~760
L290N or X42N 290~495 415~760
L320N or X46N 320~525 435~760
L360N or X52N 360~530 460~760
L390N or X56N 390~545 490~760
L415N or X60N 415~565 520~760
 
Steel pipe nominal outer diameter range Steel pipe outer diameter Coating category Coating Coating thickness
DN100~600 114.3~609.6 3PE (three-layer polyethylene) First layer: epoxy powder (green) 2.0~4.5mm
Intermediate layer: adhesive (white)
Outermost layer: polyethylene (black)
2PE (two layers of polyethylene) First layer: adhesive 2.0~4.5mm
Outermost layer: polyethylene
DN80~600 88.9~609.6 Epoxy powder Epoxy powder 200~400um
2FBE (Double layer epoxy powder) First layer: epoxy powder (green) 400~800um
Outermost layer: reinforced epoxy powder (gray green)
DN100~600 114.3~609.6 3PP (three layers of polypropylene) First layer: epoxy powder (green) 2.5~3mm
Intermediate layer: adhesive (white)
Outermost layer: polypropylene (white)
 
INCH OD API 5L ASTM A53 A106 Standard Wall Thickness
(MM) SCH 10 SCH 20 SCH 40 SCH 60 SCH 80 SCH 100 SCH 160
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
1/4" 13.7     2.24   3.02    
3/8" 17.1     2.31   3.2    
1/2" 21.3 2.11   2.77   3.73   4.78
3/4" 26.7 2.11   2.87   3.91   5.56
1" 33.4 2.77   3.38   4.55   6.35
1-1/4" 42.2 2.77   3.56   4.85   6.35
1-1/2" 48.3 2.77   3.68   5.08   7.14
2" 60.3 2.77   3.91   5.54   8.74
2-1/2" 73 3.05   5.16   7.01   9.53
3" 88.9 3.05   5.49   7.62   11.13
3-1/2" 101.6 3.05   5.74   8.08    
4" 114.3 3.05 4.50 6.02   8.56   13.49
5" 141.3 3.4   6.55   9.53   15.88
6" 168.3 3.4   7.11   10.97   18.26
8" 219.1 3.76 6.35 8.18 10.31 12.70 15.09 23.01
10" 273 4.19 6.35 9.27 12.7 15.09 18.26 28.58
12" 323.8 4.57 6.35 10.31 14.27 17.48 21.44 33.32
14" 355 6.35 7.92 11.13 15.09 19.05 23.83 36.71
16" 406 6.35 7.92 12.70 16.66 21.44 26.19 40.49
18" 457 6.35 7.92 14.27 19.05 23.83 29.36 46.24
20" 508 6.35 9.53 15.09 20.62 26.19 32.54 50.01
22" 559 6.35 9.53   22.23 28.58 34.93 54.98
24" 610 6.35 9.53 17.48 24.61 30.96 38.89 59.54
26" 660 7.92 12.7          

  We can produce different sizes, thicknesses, widths and materials according to your requirements
ASTM A53/API5l/A106/A333/A36/St35/St52/X42/X52/X56/X60/65 X70 Sch40 LSAW ERW SSAW Hot Rolled Seamless/Welded Hollow Carbon Steel Pipe for Oil and Gas Pipeline
Product Test
We will control the quality from part of material steel pipe, each pipe produced will be have it is own identify label, quality will check the chemical component and physical property and then provide material test certificate. Size dimension will be checked and show pictures to customer to guarantee all goods will be meet requirement.
ASTM A53/API5l/A106/A333/A36/St35/St52/X42/X52/X56/X60/65 X70 Sch40 LSAW ERW SSAW Hot Rolled Seamless/Welded Hollow Carbon Steel Pipe for Oil and Gas Pipeline
Accept inspection from a third party designated/paid by the buyer, such as SGS, BV.
Recognized by customers in Malaysia, Indonesia, Singapore, the Philippines, Australia, Peru and the United Kingdom. We have ISO9001/18001, CE certificates.

ASTM A53/API5l/A106/A333/A36/St35/St52/X42/X52/X56/X60/65 X70 Sch40 LSAW ERW SSAW Hot Rolled Seamless/Welded Hollow Carbon Steel Pipe for Oil and Gas Pipeline
About Us
Shandong Hongyan Metal Material Co., Ltd.
Our vision: To be a professional, reliable and outstanding world-class steel supplier.
Our company is located in Jinan City, Shandong Province, with a registered capital of RMB 50 million. We are a professional steel sales company integrating domestic and foreign trade.
Our company's main products are stainless steel sheet/coil/tube/rod, carbon steel sheet/coil/tube/rod, galvanized sheet/coil/tube, PPGI and PPGL, H-beam, I-beam, angle steel, channel steel, steel plate pile.
Our company has successfully exported to more than 70 countries in Europe, the Middle East, Africa, Southeast Asia, South America, etc.
Adhering to the win-win concept and customer-centric belief, we look forward to becoming your trusted quality partner. 
ASTM A53/API5l/A106/A333/A36/St35/St52/X42/X52/X56/X60/65 X70 Sch40 LSAW ERW SSAW Hot Rolled Seamless/Welded Hollow Carbon Steel Pipe for Oil and Gas Pipeline ASTM A53/API5l/A106/A333/A36/St35/St52/X42/X52/X56/X60/65 X70 Sch40 LSAW ERW SSAW Hot Rolled Seamless/Welded Hollow Carbon Steel Pipe for Oil and Gas Pipeline ASTM A53/API5l/A106/A333/A36/St35/St52/X42/X52/X56/X60/65 X70 Sch40 LSAW ERW SSAW Hot Rolled Seamless/Welded Hollow Carbon Steel Pipe for Oil and Gas Pipeline
Packaging and Transportation
1) Packaging: 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve or as customers' requirements.
2) Shipping: We have long-term cooperation with many experienced shipping companies and will find the most suitable mode of transportation for you.
3) Trade terms: FOB/CIF/CFR
4) Shipping port: Qingdao/Tianjin/Shanghai
5) Shipment: A: Length: ≤6m, loaded in 20GP Container. B: Length: ≤12m, loaded in 40GP Container.
Remark: Size of 20GP Container (inside :5898*2352*2393mm); Size of 40GP Container (inside:12032*2352*2393mm); Size of 40HQ Container (inside:12032*2352*2698mm).
6) Delivery time: Normal size: 7-15days send from warehouse directly. Special size:15-30days custom made for you.

ASTM A53/API5l/A106/A333/A36/St35/St52/X42/X52/X56/X60/65 X70 Sch40 LSAW ERW SSAW Hot Rolled Seamless/Welded Hollow Carbon Steel Pipe for Oil and Gas Pipeline
FAQ

Q: Can we visit your factory?
A: Warmly welcome your visit.
Q: Do you have quality control?
A: Yes, we have obtained BV, SGS certification.
Q: Can you arrange shipment?
A: Of course, we have regular forwarders who can get the best prices from most shipping companies and provide professional services.
Q: How long is your delivery time?
A: Generally it is 3-10 days if the goods are in stock. If the quantity of goods is large, the lead time is 15-45 days.
Q: How can we get a quotation?
A: Please provide the specific specification of the product. Such as material, size, shape, etc., so that we can provide the best quotation.
Q: Can we get some samples? Is there a fee?
A: Yes, you can get free samples, just need to pay the freight.
Q: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure the benefit of customers.
2. We respect every customer. We sincerely do business and make friends with our customers.

CONTACT US

Thanks for your attention!
If you need additional information, please feel free to contact us.
Welcome your inquiry about more information!


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours